44 − 1.5 in selvages − 2 in assumed width shrinkage/trimming = 40.5 in default net WOF. These deductions are editable planning examples; measure your own fabric after any washing. 108 in defaults to 104 in usable. A 4 in overhang is a starting point; ask your quilter. Net WOF is not deducted again.
Editable example prices, not verified retail quotes.
2 panels, each 40.5 × 98 in
80 in after joining · 5.4444 yd before rounding
3 panels, each 40.5 × 78 in
119.5 in after joining · 6.5 yd before rounding
Vertical seams use 1 yd less. Compare print direction and your quilter’s loading requirements before cutting.
Cut 2 full-width source panels, each 98 in long; split one lengthwise for the two outer pieces. Buy 5 ½ yd (5.5). This adds two seams with 2 in total take-up.
Joined span 79 in; required span 78 in. A centered panel avoids placing one seam directly down the middle.
$12.50 and $22.00 are editable example prices, not verified retail prices. Costs use the exact ⅛-yard purchase quantity; tax, shipping, print matching and labor are excluded.
5 ½ yd (5.5) · 2 panels
2 ¼ yd (2.25) · one seamless panel
Cut 1 × 104 × 78 in; 104 in joined span.
Wideback costs $19.25 less at these inputs.
Required batting with your selected margin: 78 × 98 in. Package names and dimensions vary by brand. The examples below are not an industry-wide standard.
| Example label | Package (in) | Fits, allowing rotation? |
|---|---|---|
| Example crib | 45 × 60 | No |
| Example twin | 72 × 90 | No |
| Example full | 81 × 96 | No |
| Example queen | 90 × 108 | Yes |
| Example king | 120 × 120 | Yes |
Smallest fitting example by area: Example queen, 90 × 108 in.
Your custom package fits the required rectangle, with rotation if needed. Confirm the batting maker’s handling, joining and shrinkage instructions.
13 strips × 5 in per color. 100 starting squares per color; produces 100 finished units (0 spare).
Buy 1 ⅞ yd (1.875) per color, 1 color. Includes 2 in squaring per color. Square cut size includes two ¼ in seams.
These conventional starting formulas include no extra trim-down allowance. Sew a test unit; for trim buffers or Magic 8, use the existing HST calculator. Strip yield is floor(usable WOF ÷ cut size); offcuts are not nested.
QuiltCutCalc cutting plan Top 70 × 90 in; backing 78 × 98 in; overhang 4 in/side Usable WOF 40.5 in; seam 0.5 in each edge Vertical 2 panels × 98 in: 5.5 yd Horizontal 3 panels × 78 in: 6.5 yd Wideback seamless: 1 panels × 78 in at 104 in WOF; 2.25 yd Confirm the actual fabric and quilter requirements. Prices are editable examples, not market quotes.
Calculations run in your browser. Shared setup URLs contain numeric measurements and method choices, which recipients and ordinary hosting logs may see; no project name, payment email or order data is included.
QuiltCutCalc cutting plan Top 70 × 90 in; backing 78 × 98 in; overhang 4 in/side Usable WOF 40.5 in; seam 0.5 in each edge Vertical 2 panels × 98 in: 5.5 yd Horizontal 3 panels × 78 in: 6.5 yd Wideback seamless: 1 panels × 78 in at 104 in WOF; 2.25 yd Confirm the actual fabric and quilter requirements. Prices are editable examples, not market quotes.
A quilt cutting calculator adds the selected overhang to both sides of your finished quilt top, accounts for width lost in joining seams, and compares vertical versus horizontal layouts to identify the lower-yardage full-panel cut. With the default 4″ margin, add 8″ to both the quilt width and length.
A static yardage chart can assume a single seam direction or a fabric width that differs from your own bolt. When a quilt top exceeds the usable width of a standard bolt of quilting cotton, you must piece two or more fabric lengths together. Whether those seams run parallel to the length of the quilt (vertical seams) or parallel to the width (horizontal seams) changes the requirement. In the examples below, the Throw saves 0.625 yard with horizontal seams, while the Twin saves 1 yard with vertical seams.
APQS (American Professional Quilting Systems) uses 4″ of extra backing on each side, while Handi Quilter’s longarm loading guide describes 4″ to 5″ per side as ideal. Those margins add 8″ to 10″ to both dimensions. They provide room for attaching backing to frame leaders and using side clamps. Confirm the actual requirement with your quilter; the default is a planning assumption, not a requirement for every machine or project.
Our quilt backing calculator runs both orientations with a default 0.5″ (½″) seam allowance on each joined piece. APQS recommends removing selvages and pressing backing seams open. Each seam therefore consumes 1″ of the two panels’ combined width. Pressing helps manage bulk but does not eliminate the roller buildup that APQS warns about with vertical seams.
In QuiltCutCalc’s reproducible 500-dimension simulation, 122 of 500 sampled rectangles (24.4%) require at least 0.75 more purchase yards with vertical seams than horizontal seams. The model shuffles 1431 distinct integer dimension pairs with widths 54″–80″ and lengths greater than width but no more than 120″, using xorshift32 seed 20261015, then takes 500 pairs without replacement. It uses 40.5″ usable WOF, 4″ overhang, 0.5″ seam allowances and ⅛-yard purchase rounding. This is synthetic geometry, not the frequency of common quilt sizes or a physical measurement study; changing the pool or WOF changes the result. Download the inputs, assumptions and all simulation results. The separate six-size reference table below shows the named Crib-to-King examples.
The optimal direction can change when the required span crosses a seam-adjusted coverage threshold. With these inputs, two standard panels cover 2 × 40.5 − 2 × 0.5 = 80″, rather than 81″. A required span just over 80″ needs a third panel. Neither seam direction always saves fabric, and a lower-yardage result still needs to fit your quilter’s loading and fabric-direction requirements.
On a 60″ × 72″ Throw with 4″ margins, the required backing is 68″ × 80″. Horizontal seams use 3.7778 raw yards, rounded to 3.875 yd (3 ⅞); vertical seams use 4.4444 raw yards, rounded to 4.5 yd (4 ½). The purchase difference is 0.625 yard. A 104″ usable wideback can cover it without a joining seam using 2 yd.
Beyond choosing a seam direction, quilters can compare 108″ nominal wideback quilting cotton with standard-width cotton. This model uses example prices of $12.50 per yard for a standard bolt and $22 per yard for wideback; these are editable assumptions, not live retail quotes. A 104″ usable wideback can cover a backing dimension up to 104″ without a seam. With 4″ margins, that corresponds to a quilt-top dimension up to 96″. Check the actual usable width and the direction of the print before rotating the layout.
APQS’s official quilt-back piecing recommendations explain seam placement, open seam allowances and the potential for vertical seams to build up on the take-up roller. A centered three-piece back can move seams away from the middle. Kansas State University Research and Extension’s quilt conservation guidance separately discusses stress from repeated folding and advises varying folds. Keep conservation advice separate from the quilter’s loading instructions. A centered layout must budget both seams: one full center panel and a second panel split into halves cover 2 × WOF − 4 × seam allowance. Wider backs can require three source panels rather than two.
In QuiltCutCalc’s wideback cost-crossover model, each of the six example sizes is calculated with $12.50/yard for standard cotton (40.5″ usable WOF) versus $22/yard for nominal 108″ wideback (104″ usable WOF). Costs multiply the exact ⅛-yard purchase, not a two-decimal display value. Print matching, extra prewashing length, tax, shipping and labor are not included.
King-size limit: the 118″ × 116″ backing exceeds 104″ in both directions. A 3⅜-yard cut is only 121.5″ long: even its unseamed 104 × 121.5 = 12,636 square inches is smaller than the required 118 × 116 = 13,688 square inches. It cannot supply a full main panel plus a sufficient side extension. This comparison instead uses 2 complete 116″ wideback lengths, buying 6.5 yd (6 ½) for $143.00; standard cotton costs $121.88. Wideback is therefore not the cheapest option for every size.
Throw: horizontal wins. Two 40.5″ panels joined with ½″ allowances cover 80″. That exactly covers the Throw’s required 80″ length, so two 68″ cuts buy 3.875 yd (3 ⅞). At the example standard price, that is $48.44, calculated from 3.875 yards rather than a rounded 3.88 display.
Twin: vertical wins. The 78″ × 98″ backing needs two 98″ cuts vertically, or three 78″ cuts horizontally. The rounded purchases are 5.5 yd (5 ½) and 6.5 yd (6 ½). A centered three-piece vertical arrangement can use 2 source panels here: its effective width is 79″ after both seams.
Threshold counterexample: increasing the Throw’s top length from 72″ to 72⅛″ makes its required backing length 80.125″. Two horizontal panels still span only 80″, so horizontal now needs 3 panels and 5.75 yd (5 ¾). Vertical remains 4.5 yd (4 ½). A ⅛″ dimension change can therefore reverse the lower-yardage orientation; fabric width and seam allowance must be measured rather than rounded optimistically.
Want to test custom quilt dimensions or generate a printable cutting diagram for a centered three-piece back? Open Live Seam Orientation Optimizer or read the worked examples in Vertical vs. Horizontal Quilt Backing Seams.
A 4-inch margin on each side adds 8 inches to your finished quilt width and 8 inches to its length. APQS uses this allowance in its backing guide; Handi Quilter describes 4 to 5 inches per side as ideal. Confirm the backing and batting margins with your own quilter before buying or cutting.
Compare both seam-aware layouts, then check your quilter’s loading requirements, fabric direction and seam placement. In this model, a 60 × 72 inch Throw uses 3.875 yards horizontally or 4.5 yards vertically; a 70 × 90 inch Twin uses 5.5 yards vertically or 6.5 yards horizontally. APQS still cautions that vertical seams can build up on the take-up roller; pressing seams open does not remove that concern.
APQS recommends a 1/2-inch backing seam allowance, removing selvages and pressing seams open. Follow your quilter’s specifications. Two joined panels lose 1 inch of total width because each contributes a 1/2-inch allowance; n panels lose 2 × seam allowance × (n − 1). A single unjoined panel loses no width to joining seams.
Manufacturer and university guidance is linked for the specific techniques it supports. The calculations, sample prices, simulation and editable width assumptions are identified separately in the text.